SEALERS

Apsol matches the substrate to the correct, and best performing sealer

Our huge range of sealing products enables us to provide the best solutions for your project

From products that provide long-lasting protection for all slightly porous materials that prevents the main causes of damage like atmospheric pollution, grease marks, ingress, graffiti, etc. It also slows down the ageing of the material and makes it easier to maintain. Permanent, non-film forming impregnation product, the material remains permeable to air and water vapour.

Completely colourless after application, they do not change the appearance or the nature of the treated material. Also fully UV ray resistant and does not yellow over time.

The active materials in our penetrative coatings are extremely effective in protecting porous and slightly porous material.

It prevents the ingress of water, oil, grease, graffiti, weak acids (fruit juice, condiments) and all types of soiling.

Apsol will always provides a digital report and record of the affected area and check in periodically to assess the and ensure the effectiveness of our treatments. 

PROTECT GUARD MG MARBLE

  • ProtectGuard® MG by Apsol is a very concentrated in active material and extremely effective in protecting porous and slightly porous material. It prevents the ingress of water, oil, grease, graffiti, basic acids (fruit juice, condiments) and all types of soiling.

    ProtectGuard® MG is a permanent, non-film forming impregnation product, the material remains permeable to air and water vapour. Colourless after application, it does not change the appearance or the nature of the treated material. ProtectGuard® MG by Apsol is also fully resistant to UV rays and does not yellow over time.

    • High-performance protection against water, oil and stains

    • Abrasion resistant

    • Permanent anti-graffiti property

    • Does not form a film, lets the material breathe

    • Invisible: does not change colour

    • UV and frost resistant

    • Slows down ageing and makes maintenance easier

      BEADING EFFECT

      10 YEARS GUARANTEE

      COVERAGE (1L = 20M2)

  • Protect Guard MG by Apsol is ideal for:

    • Slightly and very low porosity materials: marble, granite, sandstone, slate, polished materials, etc.

    • Floors and facades

    • New or old

    • Internal and external

    • Recommended for patios, pedestrian areas, facades, stairs, etc.

  • EPD and other supporting documentation are available and will be uploaded soon

WOODGUARD PROFESSIONAL

  • WoodGuard® Professional by Apsol is a new generation product for untreated or refurbished wood. It penetrates all fibres of the wood deeply to make them completely impermeable to water, grease and stains. WoodGuard® Professional protects wood, reinforces its durability and is easy to maintain.

    WoodGuard® Professional is a completely colourless product after application which does not alter either the structure or natural appearance of the wood (grains, fibres, etc.). It is a non-film forming product that lets wood breathe: it does not flake, blister or yellow.

    • Protects against water, oil and stains

    • Does not form a film, lets the material breathe

    • Odourless and colourless

    • UV and frost resistant

    • Slows down ageing and makes maintenance easier

    • More than 80% biodegradable

    • No petroleum-based solvents

    • Has a beading effect

      10 YEARS GUARANTEE

      ECO FRIENDLY

      COVERAGE (1L = 7M2)

      VOCs < 60 g/L

    • All types of untreated wood: oak, ash, pine, spruce, fir, larch, autoclaved wood

    • Floors and facades

    • New or old

    • Internal and external

    • Recommended for internal panels, cladding, fencing, shutters & more

  • EPDs and other supporting documentation are available and will be uploaded soon

POLISH GUARD

  • Polish'Guard® by Apsol is a protection and finishing wax that protects and gives a glossy look to indoor floors. This acrylic emulsion provides a non-slip coating that protects floors against water and stains. It is ideal to protect concrete, terracotta, cement, plastic, lino, wood, etc.

    Thanks to Polish'Guard®, floors resist to abrasion and scratches. Polish'Guard® by Apsol makes maintenance easier and makes floors new appearance last longer.

    • Glossy maintenance wax

    • Provides a non-slip wear surface

    • Abrasion and scratch-resistance

    • Makes maintenance easier

    • Petroleum & Solvent-free

    • 80% biodegradable

      ECO-FRIENDLY

      COVERAGE (1L = 15M2)

      VOC=36g/l*

      Rating for VOC emissions into indoor air: A+

  • Use Polish Guard by Apsol on:

    • All types mineral surfaces (concrete, terracotta, cement), plastic, lino, wood, etc.

    • Indoor

    • For use on floors: tiling, parquet, decorative concrete…

  • EPD and other supporting documentation are available and will be uploaded soon

PROTECT GUARD

  • ProtectGuard® by Apsol is the leading product for all-round protection for all porous building materials.

    ProtectGuard® provides long-lasting protection for all porous materials and prevents the main causes of damage like atmospheric pollution, grease marks, fluid ingress, graffiti, etc. It slows down the ageing of the material and makes it easier to maintain.

    ProtectGuard® by Apsol is a non-film forming impregnation product, the material remains permeable to air and water vapour. Completely colourless after application, it does not change the appearance or the type of treated material. It is also fully resistant to UV rays and does not yellow over time.

    • Environment-friendly product:

    • Water-based product.

    • Petroleum solvent and silicone free.

    • Non hazardous and non toxicProtects against water, oil, stains and graffiti

    • Does not form a film, lets the material breath

    • Odourless and invisible: does not change the colour

    • UV and frost resistant

    • Slows down ageing and makes maintenance easier

    • 100% biodegradable

      ECO-FRIENDLY

      10 YEAR GUARANTEE

      COVERAGE (1L = 6M2)

      VOC < 2 g/l*.

      Rating for VOC emissions into indoor air: A+

      LEED CERTIFICATION

  • For use on

    • Porous materials: natural or reconstituted stone, concrete, terracotta, render, etc.

    • Floors, walls and roofs

    • New or old

    • Internal or external

    • Recommended for patios, drives, pool surround areas, walls, gables, tiling joints, etc.

  • EPDs and other supporting documentation are available and will be uploaded soon

DTOX GUARD EXTERIOR

  • DtoxGuard® Ext by Apsol is a colourless stain designed for porous external mineral materials. It purifies the air by breaking down pollution (nitrogen oxides – NOx) by photocatalysis. DtoxGuard® Ext also breakdowns organic soling that can be deposited on treated surfaces. These remain clean by natural rinsing by rainwater.

    DtoxGuard® Ext by Apsol is a non-film forming impregnation product, the material remains permeable to air and water vapour. Colourless after application, it does not change the appearance or the nature of the treated material. It is also fully resistant to UV rays and does not yellow over time.

    • Purifies the air by breaking down organic soiling and pollution by photocatalysis

    • Self-cleaning

    • Effective against nitrogen oxides-NOX

    • Does not form a film, lets the material breathe

    • Colourless

    • UV and frost resistant

    • Water-based product.

    • Petroleum solvent-free.

    • Silicone-free.

    • Safe and non-toxic.

    • 100% biodegradable

      VOCs < 2 g/l*.

      ECO-FRIENDLY

      COVERAGE (1L = 7M2)

  • For use on:

    • Porous materials: natural or reconstituted stone, concrete, terracotta, coating, etc.

    • Facades and floors

    • New or old

    • External

  • EPDs and other supporting documentation are available and will be uploaded soon

DTOX GUARD INTERIOR

  • DtoxGuard® Int by Apsol is a colourless bi-component impregnation product designed for vertical internal materials and ceilings. In contact with light (UV, halogen, LED). DtoxGuard® Int purifies the air by breaking down mineral and organic pollutant gases it comes into contact with by photocatalysis.

    DtoxGuard® Int works on the most common pollutants: COVs such as BTEXs and formaldehydes but also nitrogen oxides (NOx).

    DtoxGuard® Int by Apsol is a non-film forming impregnation product, the material remains permeable to air and water vapour. Colourless, it does not change the nature of the material treated. It is also fully resistant to UV rays and does not yellow over time.

    • Purifies the air by breaking down pollutants by photocatalysis

    • Effective against formaldehydes, BTEX, NOX

    • Does not form a film, lets the material breathe

    • Colourless

    • UV resistant

    • Environmentally friendly and ecological.

    • Water-based product.

    • No petroleum-based solvents.

    • Safe and non-toxic.

      VOCs < 9 g/l*.

      Rating for VOC emissions into indoor air: A+

      COVERAGE (1L = 10M2)

    • Clear absorbent materials: rough plaster, acrylic or vinyl paint, wallpaper, glass fibre, cement based coatings, pine laminate, concrete, etc.

    • Walls

    • New or old

    • Internal

  • EPDs and other supporting documentation are available and will be uploaded soon

PROTECT GUARD PLANTBASED

  • ProtectGuard® Plant-based Formula by Apsol is a powerful vegetable-based water and oil repellent. It durably protects all porous and low-porous materials.

    ProtectGuard® Plant-based Formula protects against water penetration and limits the negative effects caused by damp. It prevents penetration from soiling and greasy stains. It slows down the ageing of the material and makes it easier to maintain.

    ProtectGuard® Plant-based Formula by Apsol also resists to funghi and limits the formation of moss and lichens. Its formulation also limits slipperiness of floors.

    ProtectGuard® Plant-based Formula is a non-film forming product. It is completely colourless after application, it does not change the appearance or the nature of the treated material. It is also is fully UV ray resistant and does not yellow over time.

    ProtectGuard® Plant-based Formula by Apsol is 50% biosourced, vegetable-based: wheat, corn, beetroot and tree resin.

    • Protects against water, oil and stains

    • Biosourced formula, vegetable-based ingredients

    • Odourless

    • Lets the material breath

    • UV and frost resistant

    • Petroleum & Solvent-free

    • 90% biodegradable

    • Has a beading effect

      ECO-FRIENDLY

      COVERAGE (1L = 10M2)

      VOC < 12g/l*

    • Porous and low-porous materials: natural or reconstituted stone, concrete, terracotta, coating, render, slate, travertine, marble, granite, etc.

    • Floors and facades

    • New or old

    • Internal or external

  • EPDs and other supporting documentation are available and will be uploaded soon

PROTECT GUARD MG ECO

  • ProtectGuard® MG Eco Marble and Granite Sealer by Apsol is specifically designed to protect marble, granite other very low porosity materials. It is water-repellent, oil-repellent and anti-staining. It is easy and safe to apply and provides up to 10 years of stress free protection.

    ProtectGuard® MG Eco prevents major causes of degradation: penetration by water, oil, greasy stains, pollution, moss etc.

    ProtectGuard® MG Eco is an water-based, eco-friendly product that is food safe compliant. It is solvent free and has a low VOC content.

    • Protection against water, oil and stains

    • Abrasion resistant

    • Does not form a film, lets the material breathe

    • Invisible: does not change the colour

    • UV and frost resistant

    • Slows down ageing and makes maintenance easier

  • Slightly and very-low porosity materials: marble, granite, sandstone, slate, polished materials, concrete, etc. Floors and facades

    New or old

    Internal and external

    Recommended for patios, pedestrian areas, living rooms, facades, stairs, etc.

 

MORE PRODUCTS

BEING ADDED…


COMPLETED PROJECT CASE STUDIES USING THESE PRODUCTS COMING SOON