READYMIX & PRECAST SOLUTIONS

GTL® by Apsol is a cement and laitance remover for daily cleaning of all materials used in building and public works.

GTL® is a new-generation product, it has been designed to meet the various requirements of applicators in terms of of safety, effectiveness, impact on the environment and respect of treated surfaces. In contrast to conventional acid products, it is not classified as a corrosive, but an irritant, which enables the risk of danger to be greatly limited.

• Rapid action powerful stripper

• Preserves user safety

• Does not attack materials

• Non-corrosive

• 70% Biodegradable after 28 days.

• ECO-FRIENDLY

  COVERAGE (1L = 10M2)

  VOC of Less than 1g/l

Ideal for maintaining construction equipment

• Metal formwork panels

• Wood formworks

• Concrete buckets

• Shores

• RMC equipment

• Truck mixer, etc.

GTN® by Apsol is a curative and preventative product. It enables the material to be protected against concrete deposits and clean it.

GTN® dissolves deposits that have stuck coat by coat though daily use. Applied at the end of the day with installations encrusted with concrete, it acts during the might to reduce deposits.

GTN® through its protective properties, prevents clogging up of the equipment due to concrete, and makes maintenance easier. The product increases the material’s life cycle.

GTN® By Apsol is much safer than other products on the market. It does not contain oil-based products or heavy metals and is not classified as a corrosive. It can be applied to all materials without altering materials (metal, paint, etc.).

• High efficiency

• Limits the adherence of concrete

• Dissolves concrete deposits

• Maintains the safety of the user

• Does not attack materials

• 100% recycled plant matter

• 100% organic-based of which 91% recycled.

• Non toxic, non corrosive, non irritant.

• Biodegradable up to 90%*.

• PCB and CMR-free.

  VOC < 1 g/l*.

  ECO-FRIENDLY

  COVERAGE (1L = 40M2)

Ideal for maintaining construction equipment

• Mixers

• Moulds, etc.

D’MouldGuard® Mineral by Apsol is a mineral-based release agent without petroleum solvents for concrete and mortar. It is intended for delayed mold release of all types of white or colored concrete (architectural, fiber, High Performance, etc.).

D’MouldGuard® removes any adhesion of concrete or laitance on the formwork and does not leave an oily mark on the concrete.

D’MouldGuard® Mineral facilitates by Apsol form stripping and allows the subsequent application of plasters or paints (acceptance of the substrate is the responsibility of the applicator).

• Removes any adhesion of concrete or laitance on the formwork

• Does not leave any oily mark on the concrete

• Allows the subsequent application of coatings or paints

• Petroleum & solvent-free

  COVERAGE (1L = 40M2)

For use on site

Use on steel, plastic, wood, plywood, polyester formwork (consult us for other supports)

GT Wash & Go® by Apsol is a new-generation degreasing and laitance removal shampoo.

GT® Wash & Go® is very effective at removing laitance, oil, grease and road film.

GT® Wash & Go® by Apsol is not classified as a corrosive, so is safe to use. Phosphate, soda and potash free, it was designed to meet the various requirements of applicators in terms of effectiveness, safety, use and impact on the environment.

• High degreasing power, eliminates road film

• Rapid action

• Preserve’s user safety

• Does not attack materials

• Non-corrosive, non irritant

• No risk to the environment.

• 70% biodegradable after 28 days.

  COVERAGE (1L = 5M2)

Ideal for maintaining construction equipment

• Asphalt pavers

• Construction plant

• Utility vehicles

• Heavy goods vehicles